Foam Headboards
Do It Yourself
Foam headboards are a beautiful, inexpensive alternative to custom upholstered headboards. Crate your headboard in different styles. You can create an infinite variety of looks to fit any room! Crate your own style headboard, and have a stunning presentation fashion look. It is easy to upholster and install.
Make your custom foam headboards look gorgeous by creating your headboard in different styles to fit in that special room! It is inexpensive and easy to upholster and install. At the end of it all, you will have a unique, stunning look.
Custom Sizes Available ![]() |
Headboard Size |
Width |
A |
B |
Total Height |
Twin (39″ x 75″) |
43″ |
21″ |
21″ |
42″ |
|
Full (54″ x 75″) |
58″ |
21″ |
27″ |
48″ |
|
Queen (60″ x 80″) |
64″ |
21″ |
27″ |
48″ |
|
King (76″ x 80″) |
80″ |
21″ |
31″ |
52″ |
![]() |
![]() |
All headboards comes with the five foam channels (D-Style Bolster) 6” wide x 3” Thick, wood, and screws. |
All headboards come with screws, fold in half, and the legs come apart for easy shipping. |
Instructions on how to Assemble the Headboard:
Kit comes with headboard with wood and screws to complete the kit! (Fabric not included.)
-
Headboard can be upholstered with hot glue gun, staples or upholstery tack nails.
-
To install the fabric on to the wood, pull the fabric tightly to the back of the panel and staple in place. Start with a few staples in the center and work your way out from the center.
-
Continue by pulling opposite sides taut and stapling in place. Staple with 1/4-inch staples every 2 inches. Trim left-over material with a sharp utility knife or scissor.
-
Then lay out the wood panel and bolsters before upholstered the headboard together.
For a gathered affect: Add 3 inches extra to the width and double or triple the length of your fabric strip, depending upon the amount of gathers you want. If you should run out of fabric or need to start the next piece DON’T PANIC! Simply fold the next strip of fabric over and lay it on top of the first strip. Continue gathering as you have been doing.
Tip: The fabric should be spray with Scotchgard™ to protect the fabric before installing it on the headboard. You can always remove the staples if you want a different look or need to have the fabric dry cleaned.
* Please look below for some examples of how to assemble the headboard.
Please click the picture below to enlarge it!
If you have any further questions about assembling or installing the headboard please feel free to call
or email us!